Búsqueda de conocimientos
Descargar documento () de 20
Borrar selección
Descargar selección
Hacemos que lo importante funcione*
Submit form in new Tab
Productos
Digital
Servicios
Mercados
Soporte
Empresa
MyEaton

Ampgard medium-voltage motor control (2.5, 5.0, 7.2 kV)

Ampgard medium-voltage starters are the premier solution in motor control, performance, reliability and protection. Eaton offers a complete line of full voltage and reduced voltage starter types. This broad selection of medium-voltage control supports a wide range of industrial applications including pulp and paper, water and wastewater, oil and gas and HVAC.

Contáctese con ventas
See Eaton's medium-voltage motor control portfolio Learn about medium-voltage motor control fundamentals
Voltage Class
7.2 kV
Horsepower
up to 8000 Hp
Main Bus Rating
up to 3000 A

Características Principales

  • Designed and tested to meet UL 347
  • Available with arc-resistant enclosures that comply with IEEE Standard C37.20.7-2017
  • Outfitted with Eaton’s Type SL vacuum contactors - the industry’s highest interrupting ratings
  • Proven durability with a long-life isolation switch rated for 10,000 mechanical operations
  • Top-mounted main bus for convenient installation and maintenance
  • Starter types include full voltage non-reversing (FVNR), reduced voltage reactor (RVR), reduced voltage autotransformer (RVAT) and reduced voltage solid state soft starter (RVSS)
  • Available with Eaton EMR series of motor protection relays for comprehensive and safe motor monitoring and starting control   
  • Completely front accessible
  • Two-high 400 A and one-high 800 A starter configurations

View design guide (layouts, technical data and application information)

Download guide specification (26 18 39)

Learn more about power system design basics

Image gallery

View images of Ampgard 7.2 kV medium-voltage motor control

Ampgard RVSS open doors
800A starter showing internal components
400A starter showing internal components
Main (lower) and variable frequency (upper) buses
800A bypass and motor select starters with double bus
Low voltage control door with Eaton EMR3000 protective relay
Ampgard lineup with double bus close coupled to SC9000EP drive
400A and 800A starters installed
Low voltage control panel and door
Main breaker bus connected to 2-high Ampgard
Ampgard remote operator installed on 400A starter
400A SL vacuum contactor with bolted connections
Ampgard lineup with incoming line, 2-high 400A, and 800A sections
Potential transformer disconnect switch
4160V stand-alone reactor starter
1200A manually operated load break switch

Ampgard, the name motor applications rely on

Eaton has been an industry leader for more than 50 years, providing UL 347 certified medium-voltage control. When it comes to controlling and protecting medium-voltage motors, the Ampgard family is the premier high-performance choice.
Learn more

Money saving double-bus design

When close-coupling Ampgard starters with medium-voltage drives for synchronous transfer applications the double bus eliminates external cables and associated accessories required to connect motor-select and bypass starters. Material and labor savings can be upwards of $25,000 for a four-motor system.

Remote operator for enhanced safety

The Ampgard Remote Operator (ARO) for the starter isolation switch that, when mounted on the front of the starter allows personnel to safely open and close the switch from outside the arc flash boundary.
View brochure

Los balastos integrados agilizan las líneas de producción multiconfiguración

Solución compacta y económica que combina el interruptor principal y los arrancadores de motor Ampgard de Eaton con la unidad de media tensión SC9000 a través de un bus común en un solo ensamblaje integrado de alta calidad. Todo el conjunto está disponible como resistente a arcos eléctricos.
Especificaciones

View design guide (layouts, technical data and application information)

Download guide specification (26 18 39)

Learn more about power system design basics

Ratings

POWER RATING 50-5000 Hp
INPUT VOLTAGE RATING 2400-6900 V
BASIC IMPULSE LEVEL (BIL) 60 kV BIL
INTERRUPTING RATING 50 kA rms symmetrical
AMBIENT TEMPERATURE 0 to 40 degrees C

Standards

UL                                                                                        347
NEMA ICS3
CSA C22.2
THIRD PARTY RECOGNITION/APPROVAL UL/cUL available for most configurations
SEISMIC QUALIFICATION IBC

Enclosure

ENCLOSURE TYPE                                                                                         
 NEMA 1, NEMA 12, NEMA 3R
ACCESSIBILITY
 Front                                                                  
INDOOR SECTION DIMENSIONS (TYPICAL)
 36"w x 30"d x 92"h
BUS INSULATION Uninsulated is standard, heat shrink sleeve is optional
BUS SUPPORTS Glass polyester

DEVICES

SWITCHING DEVICE                                           
 Vacuum contactor (400A / 800A)
CONTACTOR CONNECTION
 Bolted is standard, stab is optional
FUSE MOUNTING Bolted is standard, stab is optional
Descargar enlaces
Eaton es una empresa de gestión inteligente de la energía dedicada a mejorar la calidad de vida de las personas y a proteger el medio ambiente. Nos guiamos por nuestro compromiso de hacer negocios de manera correcta, de trabajar de manera sostenible y de ayudar a nuestros clientes a gestionar la energía ─ hoy y en el futuro. Aprovechamos las tendencias de crecimiento global de la electrificación y la digitalización para acelerar la transición del planeta hacia las energías renovables, ayudamos a resolver los retos más urgentes del mundo en materia de gestión de la energía.
Empresa
Enlaces rápidos
© 2025 Eaton Todos los derechos reservados.